What is the process of pressing metal

Process flow of scrap metal pressing

1. Material preparation: Firstly, it is necessary to prepare the metal sheet to be processed, and select the material and thickness according to the engineering requirements
2. Design drawing: Designers draw production drawings based on customer requirements, required shapes and sizes
3. Cutting and punching: Cut and punch the metal plate according to the drawing for the template
4. Mold preparation: Make the corresponding mold according to the design drawings
5. Hot or cold pressing: Using metal pressing equipment to press metal plates to form the desired shape and size
6. Cutting: Cut the metal plate into the required size

What are the waste metal treatment equipment available

Light and thin material crusher: for crushing and de labeling of light materials
Metal packaging machine: for pressing and forming iron, copper, and aluminum shavings
Car flattening machine: a large metal pressing equipment that can press cars into blocks in one go
Crocodile shearing machine: Cutting machine technology for cutting and processing waste materials
Shredder: used for crushing hard materials, rubber, and metal materials with multiple functions
Cake chip machine: processing and pressing aluminum chips into shape

Precautions for metal pressing

1. Reasonable mold design: The design of the mold should be based on factors such as the material, thickness, and shape of the metal plate, to ensure that the pressed finished product will not deform or produce quality problems.
2. Maintain uniform pressure: During the pressing process, ensure that the pressure is uniform to avoid local over pressing or over stretching
3. Temperature control: For some special metal plates, hot pressing treatment is required, and attention should be paid to temperature control to prevent deformation or even melting of the metal plates caused by excessive temperature.
4. Keep the mold clean: During the metal pressing process, the mold may be contaminated, causing defects on the surface of the finished product. Therefore, it is necessary to regularly clean and maintain the mold